1. Model: RH-MY-C

2. Material: skeleton /304 high quality stainless steel;The surface of the bed is filled with sponge, soft and comfortable material, not easy to change, not easy to aging;Can be removed for cleaning and disinfection;

3. Overall dimension (maximum) : minimum state: 2000L×700W×735H (including guardrail) mm;

Highest state: 2000L×700W×1470H (backrest adjusted to the highest) mm

4. Lying bed size: 1865*650*282 (including guardrail) mm;

5. Maximum load bearing: 150 Kg;

6. Bed body lifting stroke: 430mm;

7. Maximum tilt Angle of backrest: 28 degrees

8. One-way time of bed rise or fall: 30 seconds;

9. Backrest tilt movement one-way time: 10 seconds;

10 guardrail: the guardrail height is 270mm, both sides of the guardrail can rotate 180°, can directly from the bed or wheelchair transfer bathe to bathe, greatly reducing the labor burden of care workers.At the same time also reduce the damage to the bathers;

11. Drainage: the whole bed body is slightly tilted, the head of the bed is 3cm higher than the tail of the bed, the diameter of the drainage hole under the bed surface is 45mm, push-button drainage, convenient and fast, smooth drainage;

12. Anti-collision design: there are anti-collision wheels around the bed body to prevent the bed from being collided;

13. Foot wheel: advanced protection directional + universal medical brake mute caster, easy to move, simple operation, reliable performance.

14. Control mode: wired control panel press button, can realize the bed lifting and backrest tilt at any position stop and start;

15. Mute electric push rod: medical grade special push rod, noise below 40 dB;

16. Environmental lithium battery capacity: 2200mAh;It can be used for more than 5 days at the normal frequency of full power status (according to 10 people taking a bath every day).It only takes 3 hours to reach the state of full charge after the power is used up.

17. Power display: real-time display of battery power, charging time accurately grasp;